Cavi trunk in rame
Multiple cables / trunk cables

- in the requested lengths
- with customized imprints on the single cables
- with the requested modules/connectors
- 100% pre-tested, with measurement reports
Concetti e vantaggi
Più veloci, sicuri e convenienti: la tendenza verso i sistemi pre-assemblati
La necessità di effettuare spostamenti, ampliamenti e modifiche in tempi sempre più brevi fa crescere la domanda di interventi via via più rapidi, sicuri ed economici. Le installazioni devono spesso avvenire durante l’esercizio e devono essere eseguite senza costosi interventi sul posto di lavoro e senza interruzioni e, per quanto possibile, senza il coinvolgimento di appaltatori esterni. Né la qualità delle soluzioni (requisiti di massima disponibilità) né le loro performance dovrebbero venire meno nel processo.
Le soluzioni modulari trunk di Datwyler forniscono la risposta perfetta.
I cavi trunk pre-assemblati sono fabbricati utilizzando componenti ad alte prestazioni e in diverse combinazioni. I prodotti vengono consegnati nelle lunghezze richieste dal cliente, con stampigliature personalizzate sui singoli cavi e già stati testati e certificati secondo gli standard internazionali più recenti.
Ciò permette agli installatori e agli operatori, in particolare nei data centre, di implementare sistemi anche complessi della massima qualità e in tempi molto brevi.
Moduli e plug per cavi trunk in rame
application | construction | compatible with cable | ||
---|---|---|---|---|
Cat.6A modules / Class EA: | ||||
RJ45 module KS-T Plus 1/8 Cat.6A (IEC) | up to 10GBase-T | shielded | flexible / solid | |
RJ45 module MS-K Plus 1/8 Cat.6A (IEC) | up to 10GBase-T | shielded | flexible / solid | |
RJ45 module MS-C6A 1/8 Cat.6A (IEC) 180°-K | up to 10GBase-T | shielded | flexible / solid | |
Cat.6/6A plugs / Class EA: | ||||
RJ45 plug 4P Cat.6A | up to 10GBase-T | shielded | flexible / solid | |
RJ45 plug 4P Cat.6 | up to 1GBase-T | shielded | flexible / solid | |
Tipologie di cavi trunk in rame
max. Class | application | d [mm] | iameter max. length [m] | ||
---|---|---|---|---|---|
Solid BOL (Breakout light) cables: | |||||
6-fold CU 7002 6x4P | F | min. 10GBase-T | 21.2 | 85 | |
Flexible BOL (Breakout light) cables: | |||||
6-fold CU 7702 6x4P flex | F | min. 10GBase-T | 17.6 | 60 | |
12-fold CU 7702 12x4P flex | F | min. 10GBase-T | 22.2 | 60 | |
Flex tube cables: | |||||
3-fold CU 7702 3x4P flex | F | min. 10GBase-T | 12 | 60 | |
6-fold CU 7702 6x4P flex | F | min. 10GBase-T | 20 | 60 | |
8-fold CU 7702 8x4P flex | F | min. 10GBase-T | 22 | 60 | |
12-fold CU 7702 12x4P flex | F | min. 10GBase-T | 27 | 60 | |
16-fold CU 7702 16x4P flex | F | min. 10GBase-T | 32 | 60 | |
Single cables: | |||||
CU 7702 4P flex | F | min. 10GBase-T | 5.8 | 60 | |
2-fold CU 7702 4P flex | F | min. 10GBase-T | 5.8 x 11.6 | 60 | |
CU 7120 4P | FA | min. 10GBase-T | 7.5 | 90 | |
2-fold CU 7120 2x4P F8 | FA | min. 10GBase-T | 7.5 x 15.8 | 90 |
Definizione/determinazione della lunghezza
The following criteria are decisive for all Datwyler copper trunks: | ||
L = | Length between dividers / fixing points = purchase order length | |
A = | Type of assembly side A: as required / depending on application, legs graded in length or of equal length | |
B = | Type of assembly side B: as required / depending on application, legs graded in length or of equal length |
Checklist: pianificazione del progetto con cavi trunk in rame
Do you need the copper trunks for today or future needs?
1GBase-T, 10GBase-T, ...
Please choose the right copper cable type.
Choose the cable type - taking into account the requested number of single cables and their Category.
Flex cables are particularly flexible in terms of packing density but have higher attenuation - their maximum link lengths are a little bit shorter!
Please choose the right modules or plugs for the planned application.
Category 5e, 6, 6A, 7 or 7A?
For Class D, E, EA, F or FA?
Please choose the suitable patch panel.
KS, MPS, ...?
What will be the length of the requested copper trunks?
Where do you want to install it: in cable trays above the racks or in the false floor? Please consider the diameter, the weight and the admissable bending radius of the trunks!
How do you want to route the cables inside the distribution rack to the patch panels?
• side-fed from right?
• side-fed from left?
• centred from behind?
• or ... ?
The single cables ("legs") can be graded in length, depending on how the trunk cable will be fixed inside the rack.
The "legs" may all have the same length - with enough reserve up to the farthermost connecting point.
Excess cable lengths can be laid in a tray behind a 19“/1U cable management panel.
Customer-specific imprint / labelling?
Available on request for all copper trunks.
Please consider some extra time for the pre-assembly in your timetable.
You need consulting service?
Please do not hesitate to call us. We will be happy to help you.
Checklist as PDF file >>