FO-DCS modular subracks, 19“/4U

to take 12 FO-DCS plug-in modules / front plates 3U/7HP

Modularly equippable FO-DCS 19”/4U subrack

Strain reliefs and blank partial front plates


Sturdy aluminium housing with side panels and front 19"/3U mounting brackets.
Pre-assembled with horizontal 84HP guide rails to take a maximum of twelve 3U/7HP FO-DCS plug-in modules or front plates.
The extractable excess cable length tray (1U) is equipped with a base and offers 2 big slots on one side and pre-cut holes on the other side.
It can be inserted to the subrack on the fourth rack unit from the rear in two ways, so that optionally the slots or holes can be used as cable entry openings.
The slightly recessed arrangement of the excess cable length tray allows a 19"/1U management panel with support brackets or a patch mangement tray with guide elements to be fitted at the front.
The modularly equippable 19"/4U subrack can be used for a wide variety of applications, depending on the type of plug-in module or front plate.
It can be used as a modular high-density solution for up to 144 duplex ports (288 fibres) or up to 144 MTP ports (1728 fibres) in the data centre environment.
It will accept up to 12 FO-DCS 3U/7HP plug-in modules or up to 12 FO-DCS 3U/7HP front plates that are used to terminate pre-assembled LCD or MTP® trunk or breakout cables or fibre optic cables which are spliced in-situ. (It will also accept RJ45 Keystone plug-in modules).
Easy migration to all parallel optic applications, e.g. to 40/100 GbE, is possible with FO-DCS 3U/7HP MTP front plates.
19"/4U subrack with 19" mounting brackets on 3U (without plug-in modules / front plates).
84HP guide rails for 12 3U/7HP FO-DCS inserts.
1U excess cable length tray, integrated, insertable from rear.
19" mounting material. Cable support rails and more accessories available. May be combined with various blanking panels and management panels from the Datwyler range.
Colour:Aluminium, anodised or black
Dimensions:19“/4U, W x H x D: 482.6 x 177.6 x 295 mm
Acceptance capacity:84HP, 12 3U/7HP FO-DCS inserts
MTP® is a registered brand of US Conec.


Product Datasheet
Tender text


Article No.ProdottoColoreMateriale / ColorePU
470540FO-DCS modular subrack, 19“/3U, 84HP (without excess length tray)argentoAlu, anodised1 pc.
470542FO-DCS modular subrack, 19“/4U, 84HPargentoAlu, anodised1 pc.
470642FO-DCS modular subrack, 19“/4U, 84HPneraAlu, black1 pc.
470549Strain relief for FO-DCS modular subrack 4U (depth: 80 mm)nera1 pc.
470649Strain relief for FO-DCS modular subrack 4U, with black brush strip (depth: 48 mm)nera1 pc.
470648Strain relief for FO-DCS modular subrack 4U (depth: 48 mm)nera1 pc.
470555FO-DCS blank partial front plate 3U/7HPargentoAlu, anodised1 pc.
571595FO-DCS blank partial front plate 3U/7HPneraPC, black1 pc.

Prodotti correlati

FO-DCS modular panels, 19”/1U

to take 3 FO-DCS plug-in modules / front plates 3U/7HP