FE180 E30 CL

Safety cable, 0.6/1kV, armoured with rodent protection, Keram

halogen-free, with improved fire characteristics,
with reference to SEV TP 20B/3C and CENELEC HD 604 S1 part 5.H

Conductor: solid / stranded
2  Fire barrier: high-peformance Keram compound
Insulation: cross-linked polymer, zero halogen
Filler: flame retardant, zero halogen
Inner Sheath: Polyolefin flame retardant, low smoke, zero halogen
Armouring: galvanised steel tape


Safety cables are installed in all areas that require special protection of people and equipment against fire and fire damages and where strict security requirements must be fulfilled.
Suitable for indoor applications. For outdoor applications, protection must be provided against exposure to direct sunlight. The cable should only be laid directly in earth or water if a protective conduit is used.
Permitted operating temperature at conductor of +90˚C.
Bare copper, solid or stranded, IEC 60228 and EN 60228
(≥16 mm2: VDE 0295)
Conductor insulation:

Special compound, HD 604 S1 part 5 H
(≥16 mm2: double-layer insulation, special compound, VDE 0266 "HXI1")


HD 604 S1 part 5 H
(≥16 mm2: halogen-free polyolefin compound)

Inner sheath:

Compound, HD 604 S1 part 5 H
(≥16 mm2: Polyolefin compound, VDE 0276-604, CENELEC HD 604 S1 "HM 4", flame-retardant)

Armouring (rodent  protection):Single-core cable with copper tape (CLCU), multicore cable with galvanised steel tape (CL)
Outer Sheath:

Compound, HD 604 S1 part 5 H
(≥16 mm2: in accordance with CENELEC HD 308 S2 and VDE 0293)

Core Colours:


Sheath colour:orange 


Nominal voltage:


Test voltage:3500V, 50Hz

Minimum bending radius

during and permanent installation:

15 x D (single core cable) 

12 x D (multicore cable)

(D = outer diameter)

Operating temperature

permanent installation:

-45°C to +90°C


during installation:

-5°C to +50°C

* System Circuit Integrity is dependent on installation method

Zéro halogène, pas de gaz corrosifs

IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, SEV TPV11, AREI-RGIE Art.104-SA


IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2, SEV TP 20B/3C, AREI-RGIE Art.104-F1

Non propagateur de l'incendie

IEC 60332-3-24 Cat. C, EN 60332-3-24 Cat. C, VDE 0482-332-3-24 Cat. C, SEV TP 20B/3C, AREI-RGIE Art.104-F2

Densité de fumée

IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2, SEV TP 20B/3C 3.4.3, AREI-RGIE Art.104-SD

Maintien de l'isolation (FE180)

IEC 60331-11/-21 (180 minutes), VDE 0472 part 814 (FE180), IEC 60331-1, IEC 60331-2 (120 minutes ), EN 50200, VDE 0482-200 (PH120) and EN 50362, VDE 0482-362 (120 minutes), BS 6387 C/W/Z, AREI-RGIE Art.104-FR1

Maintien de fonction

FE180 E30 CL: according to DIN 4102-12, VKF Fire Safety Application No. 24176, AREI-RGIE Art.104-FR2


Fiche technique du produit


N° d'articleProduitNombres de coeursSection transversale [mm²]Gaine Ø [mm]Poids [kg/km]Poids Cu [kg/km]Charge d'incendie [kWh/m]Conducteur
193886FE180 E30 CL31.511211430.46massif
187199FE180 E30 CL32.512256720.50massif
191097FE180 E30 CL34143731150.69massif
191121FE180 E30 CL3615.84871730.90massif
188354FE180 E30 CL310186552881.20massif
191595FE180 E30 CL42.514298960.56massif
187167FE180 E30 CL44164081540.79massif
188352FE180 E30 CL46175392301.06massif
191038FE180 E30 CL52.5143971200.76massif
188350FE180 E30 CL54164881921.05massif
188353FE180 E30 CL5617.56432881.28massif
188397FE180 E30 CL510219714801.76massif
187197FE180 E30 CL72.5164811680.91massif
188355FE180 E30 CL76198014031.53massif
188356FE180 E30 CL7102312126722.13massif
192461FE180 E30 CL81.5154041150.85massif
187128FE180 E30 CL82.5165041921.04massif
191104FE180 E30 CL84186843081.36massif
Additional dimensions available on request

Produits apparentés

(N)HXH FE180 E30-E60

Câble de sécurité, 0.6/1kV, Keram

(N)HXH CL FE180 E30-E60

Câble de sécurité, 0,6/1 kV, avec protection contre les rongeurs, Keram

FE180 E30

Safety cable, 0.6/1kV, Keram