Cables preconectorizados en fibra óptica

Cached
Pre-assembly of loose-tube cable
Multimodo, todos los tipos de conectores actuales
El premontaje de los cables de tubo suelto de Datwyler permite a los clientes trabajar con cables múltiples de fibra óptica (trunks) listos para instalar en las longitudes y tipos solicitados.
Los trunks se fabrican según las...
Cached
Pre-assembly of loose-tube cable
Monomodo, todos los tipos de conectores actuales
El premontaje del cable FO de tubo suelto de Datwyler permite a los clientes trabajar con cables múltiples de fibra óptica ( trunks) listos para instalar en las longitudes y tipos solicitados.
Los troncos se hacen según las...
Cached
FO Universal ZGGFR / U-DQ(ZN)BH
Multimodo, todos los tipos de conectores actuales
El premontaje de los cables de conexión de Datwyler permite a los clientes trabajar con cables múltiples de fibra óptica (troncos) listos para instalar en las longitudes y tipos solicitados.
Los trunkss se fabrican según las...
Cached
FO Universal ZGGFR / U-DQ(ZN)BH
Monomodo, todos los tipos de conectores actuales
El premontaje de los cables de conexión de Datwyler permite a los clientes trabajar con cables múltiples de fibra óptica (trunks) listos para instalar en las longitudes y tipos solicitados.
Los trunks se fabrican según las...
Cached
FO flexible trunks
Pre-ensamblado
Un cable troncal (Trunk) flexible Datwyler FO consiste en hasta 24 cables de una sola fibra (por cada 2,0 mm) que se combinan en una robusta manguera trenzada de polietileno de alta densidad y tienen conectores premontados en ambos...
Cached
FO connector termination
Valores de rendimiento óptico
Datwyler ofrece una amplia gama de conectores terminados para las necesidades individuales de los clientes, como los tipos de conectores SC, LC, ST, LSH, FC/PC, MU, MTP/MPO, y otros.
Estos pueden ser suministrados tanto en variantes...

Concept & Benefits

Faster, safer and more cost-effective: the trend towards pre-assembled systems

Ever shorter time frames for moves, adds and changes raise the question of how to carry out installations even more quickly, more safely and more cost-effectively. Installation often has to take place during current operation and needs to be executed without costly on-site work and disruption, and as far as possible without any outside contractors. Neither the quality of the solution (maximum availability requirements) nor its performance should be forfeited in the process.

Datwyler’s modular trunk solutions provide the perfect answer.

Pre-assembled trunk cables are fabricated using high-performance cable products which are supplied in combination with different leg lengths and modules or connectors. The products are delivered in the lengths requested by the customer, with customized imprints on the single cables, and have already been tested and certified in accordance with the latest standards.

This provides installers and operators, particularly in data centers, with products which make it possible to install even extensive fibre optic systems to the highest quality in a very short time. 

Length definition / determination

     The following criteria are decisive
for all Datwyler fibre-optic trunks:
L =  
 
Length between dividers / fixing points 
= purchase order length
A = 
 
 
Type of assembly side A: 
as required / depending on application,
legs graded in length or of equal length
B = 
 
 
Type of assembly side B:
as required / depending on application,
legs graded in length or of equal length


Please note that pre-assembled loose-tube cables always come with breakout section graded in length.
This gradation may be customized.

Checklist: Project planning with fibre optic trunks

Do you need the fibre optic trunks for today or future needs?
10GBase, 40GBase, 100GBase?

Please choose the right fibre optic cable type or solution.
Please select the cable type or solution on the basis of the needed performance class, length and number of fibres.
Breakout trunks and flexible trunks are particularly flexible in terms of fibre number. They do not need a distribution splitter and are suitable especially for comparatively short rack-to-rack connections with fibre numbers ≤ 24.

Choose the requested fibre type.
OM4 is state-of-the-art in data centres (or at least OM3).
For single-mode it should be OS2.

Select the requested connector type.
LC is the most common connector for single fibres.
It is also possible to choose any other connector type for trunk cable termination.

What will be the length of the fibre optic trunks?
Where do you want to install them? In cable trays above the racks or in the false floor? Please consider the diameter, the weight and the admissable bending radius of the trunks!

How do you want to route the cables inside the distribution rack to the patch panels?
• side-fed from right? 
• side-fed from left?
• centred from behind?
• or ... ?

The single cables ("legs") can be graded in length, depending on how the trunk cable will be fixed inside the rack.
The single cables may all have the same length, but this increases the dimensions of the connector protection. That´s the reason why Datwyler offers single fibre termination graded in length.
The single cable elements are usually placed in breakout boxes behind the management panels.

Customer-specific imprint / labelling?
Available on request for all fibre optic trunks.

Please consider some extra time for the pre-assembly in your timetable.

You need consulting service?
Please do not hesitate to call us. We will be happy to help you.
 
Checklist as PDF file >>