1.RJ45 patch cords Cat.6A IEC

RJ45 patch cords Cat.6A IEC Cat.6A, Class EA for 10GBase-T and 1GBase-T, CATV 862 MHz shielded IEC 61935-2:2010 (Cat.6A)ISO/IEC 11801:2001 / Amd.1:2008 and Amd.2:2010 (Class EA)EN 50173-1:2011  Shielded patch cords and connection cables with shielded RJ45 plug on both ends, fitted with an overmoulding and an anti-snag boot in the same colour as the cable sheath and with latch protection. The cable CU 7702 flex 4P (Cat.7) offers excellent Next and impedance values due to the individually foil… 

2.RJ45 patch cords Cat.6

RJ45 patch cords Cat.6 Applicable for all applications up to Class E (250 MHz), for example Gigabit Ethernet 1000Base-T, Fast Ethernet 100Base-T, ISDN, and PoE according to IEEE 802.3af. One patch cord, bundled as a ring in a plastic bag. RJ45 patch cord, Cat.6 (up to 250 MHz), unshielded, with a RJ45 plug (Cat.6) and a moulded anti-snag boot on both ends.Unshielded flexible cable U/UTP, 250 MHz, 4P, AWG 24.Cable sheath made of FR/PVC, also available as FRNC/LS0H.RJ45 plugs (8/8) Cat.6 in… 

3.RJ45 patch cords Cat.6 UTP AWG28

RJ45 patch cords Cat.6 UTP AWG28 Class E Applicable for all applications up to Class E (250 MHz), for example Gigabit Ethernet 1000Base-T, Fast Ethernet 100Base-T, ISDN, and PoE as per IEEE 802.3af.Bundling of the patch cords is not recommended when Power over Ethernet is used. One patch cord, bundled as a ring in a plastic bag. UTP patch cord with very small cable dimension to be used in commercial IT infrastructure.RJ45 patch cord, Cat.6 (up to 250 MHz), unshielded, with a RJ45 plug (Cat.6)… 

4.Intelligent 10-pin Keystone patch cords

Intelligent 10-pin Keystone patch cords 500 MHz, shielded Jumper connection to electronic patch panels / Intelligent Patch Panel. Complies to standard ANSI/EIA/TIA 568-C.2, ISO/IEC 11801:2002 / Amd 2:2010 and EN50173 (2011). 50 micro-inch gold plating nickel phosphor bronze. With LED to assist the identification of a patch cord connection and to locate the other end of the patch cord when one end is connected to the patch panel. Quick identification of patch cords when connected to Intellegent… 

5.RJ45 patch cords Cat.5/5e

RJ45 patch cords Cat.5/5e IEEE 802.3at Cat.5 / 5e / Class D for 100Base-T and 1GBase-T shielded The Datwyler patch cords and connection cables are fitted with a shielded RJ45 plug and a moulded anti-snag boot on both ends. The cable CU 5502 flex 4P offers an excellent screen performance due to its overall copper braid and is highly flexible. Standard assortment: from 0.5 m until 20 m. Customised adjustments (anti-snag boot, termination, label) are available at short notice. Up to 1 Gbit/s… 

6.Intelligent 10-pin Keystone patch cords

Intelligent 10-pin Keystone patch cords DC resistance (20 ℃):<145 Ω / km                                                           Capacitance:43 pF / m Characteristic impedance:100 ± 15 Ω Rated voltage:30 V Dielectric strength:700 VAC / min Delay deviation:25 ns / 100m  ANSI / EIA / TIA 568-C.2ISO/IEC 11801:2002 / Amd 2:2010EN 50173 (2011) Jumper connection to electronic patch panels / Intelligent Patch Panel.Complies to standard ANSI/EIA/TIA 568-C.2, ISO/IEC 11801:2002 / Amd 2:2010 and… 

7.RJ45 patch cords Cat.5e UTP

RJ45 patch cords Cat.5e UTP Applicable for all applications up to Class D (100 MHz), for example Gigabit Ethernet 1000Base-T, Fast Ethernet 100Base-T, ISDN, and PoE according to IEEE 802.3af. One patch cord, bundled as a ring in a plastic bag. RJ45 patch cord Cat.5e (up to 100 MHz), unshielded, with a RJ45 plug (Cat.6) and a moulded anti-snag boot on both ends.Unshielded flexible cable U/UTP Cat.5e, 100 MHz, 4P, AWG 24.Cable sheath made of FR/PVC, also available as FRNC/LS0H.RJ45 plugs (8/8)… 

8.110 series patch cord, 1P, 2P flex

110 series patch cord, 1P, 2P flex For the transmission of voice signals. Bending radiusduring draw-in:8 x outer diameter permanently installed:4 x outer diameterInstalled temperature:-20° C - + 75° C Flexible patch cord for the transmission of voice signals.Meets the requirements of EN 50173.1-2007, ISO 11801-2002 and ANSI-EIA/TIA 568.C2.Equipped with an RJ45 or 110 connector on one cable end and a 110 or RJ11 connector on the other.Available in different standard lengths. 110 series flex… 

9.Defined Disconnect CP-Link

Defined Disconnect CP-Link In medical technology, sound studio technology and measuring technology as well as in the connection of computer systems.Reliably separates any connection above a defined tensile force to protect the equipment.The restraining force is set in such a way that unintentional triggering is prevented.Pull out force 20 N +15/-10 N. shielded Releases the connection of patch cable and socket above a certain tensile force and thus protects circuit boards and sockets from… 

10.EN-60KDS

EN-60KDS In medical technology, recording studios, measuring and monitoring technology and in the potentialfree connection of remote computer systems.Galvanic isolation of any device connected to a copper-based Ethernet network (wires and screen).Suppresses potential equalisation currents and protects medical and non-medical equipment and systems from the consequences of dangerous network voltage surges which can be caused by switching operations, moisture, electrostatic discharge, differences…